Monel 400 wire mesh is multiduty alloy wire mesh.It is a Nickel-chromium-copper alloy wire mesh and the Ni is 63%,Cr is 19-21% and Cu is 28-34%. It has excellent resistance to corrosion and high temperature and it is widely used in electricity and electron component,water-heater and heat-exchange equipment. The monel wire mesh has super performance in petroleum industry,shipborne equipment,pump etc

Monel K500 (K500, NCu30-2-1, UNS N05500) alloy has the same mechanical properties as high strength, corrosion resistance and non-magnetic properties,and also has the same corrosion resistance of Monel 400.It can be used as pump shaft material and is suitable for working under geological conditions o

Hastelloy C-22 wire mesh is a multifunctional hastelloy alloy mesh with excellent overall corrosion resistance. There are many chemical factorys to need hastelloy C-22 wire mesh to offer resitance to corrosion and high temperature in filtering. The molybdenum of hastelloy C-22 alloy is 13%. It is difficult to produce hastelloy C-22 alloy wire mesh because that molybdenum is very hard and tough. We fistly need to know the mechanical property of the hastelloy alloy if want to produce hastelloy hastelloy C-22 mesh.

The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives.Acid medium: monel wire mesh is corrosion resistant in sulfuric acid with a concentration of less than 85%.M400 is one of the few materials that can offer resistance to hydrofluoric acid. Water corrosion: monel alloy wie mesh has excellent corrosion resistance in most water corrosion conditions, and pitting corrosion and stress corrosion are rarely found. Corrosion rate is less than 0.025mm/a. High temperature corrosion: the highest temperature of M400 continuous operation in air Generally, at about 600 ° C, in high temperature steam, the corrosion rate is less than 0.026 mm / a. Ammonia: Due to its high nickel content, Monel 400 wire mesh can withstand corrosion under anhydrous ammonia and ammoniation conditions below 585 °C.

TThe structure of monel 400 alloy wire mesh is a high-strength single-phase solid solution, single-phase austenite structure. Monel 400 mesh is the corrosion-resistant alloy mesh with the largest using, the most versatile and excellent comprehensive performance.Monel alloy wre mesh has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and excellent corrosion resistance to hot concentrated alkali liquor. It is also resistant to corrosion by neutral solutions, water, sea water, the atmosphere, organic compounds, etc

Monel 400 wire mesh, also known as nickel alloy mesh,is an alloy made of metal nickel as a base, adding other elements such as copper, iron and manganese. Monel 400 mesh has good corrosion resistance and is silver-white, suitable for edge wire materials.Monel 400 alloy wire mesh is mainly used in the fields of chemistry and petrochemicals and marine development. Monel mesh is used to manufacture a variety of heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, vessels, towers, tanks, valves, pumps, reactors, shafts, etc.

As we know, many factorys need hastelloy B3 wire mesh to offer resitance to corrosion and high temperature in filtering.The molybdenum is 28.5%. It is difficult to produce wire mesh becourse that molybdenum is very hard and tough.We fistly need to know the mechanical property of the hastelloy alloy

There are many factorys to need hastelloy C-276 wire mesh to offer resitance to corrosion and high temperature in filtering. The molybdenum of hastelloy C-276 alloy is 13%. It is difficult to produce hastelloy C-276 alloy wire mesh because that molybdenum is very hard and tough. We fistly need to know the mechanical property of the hastelloy alloy if want to produce hastelloy hastelloy C-276 mesh.

Hastelloy b2 alloy is nickel-molybdenum alloy, The molybdeumu is 28%. As far as we know, molybdenum is very hard and tough, so it is difficult to produce a wire mesh.Anping Gaoyuan Co.ltd specialize in the production of Hastelloy b2 wire mesh for 10 years and can draw wire,anneal,weave hastelloy wir

Hastelloy b3 alloy is nickel-molybdenum alloy the same with Hastelloy b2 alloy .B-3 alloy has excellent corrosion resistance to hydrochloric acid at any concentration and all temperature. It also prevents attack by sulfuric acid, acetic acid, formic acid and phosphoric acid. Hastelloy B3 Mesh signif