Carpeter 20/cb-3 alloy (aslo called Carpenter N08020 alloy)is a chromium-nickel-molybdenum-copper corrosion-resistant alloy. It has good corrosion resistance in sulfuric acid, nitric acid and its mixed acid and It is mainly used in chemical, petrochemical, metallurgical and rare metal refining indus

SS 1.4539 wire mesh (also named stainless steel 904l wire mesh) is the Amerca's standard. This kind of mesh usuall is used in in non-oxidizing acids ,such as sulfuric acid, acetic acid, formic acid and phosphoric acid for filtering . It offers excellent corrosion resistance and high temperature resi

904l stainless steel is an austenitic stainless steel. Because of the ratio of Cr (chromium) 20% and Ni (nickel) 25%, the temperature resistance is relatively high. At the same time, because of the high nickel content, Mo (molybdenum) contains 5%, the corrosion resistance is also excellent. 904l sta

Inconel 601 alloy wire mesh( also called UNS N06601 wire mesh,standard of America) is one kind of inconel wire mesh.It is different from inconel 600 wire mesh and not only contains nickel chrome but also aluminum. The content of aluminum is 1.0-1.7% because it contains aluminum and therefore has hig

Duplex 2507 stainless mesh is also one kind of duplex stainless wire mesh.The duplex 2507 alloy has excellet corrosion fatigue and wear corrosion properties. In the case of certain corrosive media, it is suitable for making power equipment such as pumps and valves. In the severe atmosphere, duplex 2

Duplex S32750 stainless mesh(is also 2507 duplex stainless steel wire mesh) is one kind of super duplex stainless steel wire mesh.PRE is than 40% and It contains Cr 25% and high molybdenum (>3.5%), high nitrogen (0.22% - 0.30%).Compared with stainless steel, it has high strength and resistance to i

Duplex stainless steel is half of the ferrite and half of austenite in its solid solution structure, The content of the general phase is also reach to 30%.With a little C, the Cr is 18%-28%, and the Ni is 3% -10%. Some of duplex steels alloy also contain alloy elements such as Mo, Cu, Nb, Ti, and N.

Duplex stainless steel is half of the ferrite and half of austenite in its solid solution structure, The content of the general phase is also reach to 30%.With a little C, the Cr is 18%-28%, and the Ni is 3% -10%. Some of duplex steels alloy also contain alloy elements such as Mo, Cu, Nb, Ti, and N.

Incoloy 800 alloy wire mesh( also called incoloy N08811 wire mesh,standard of America) is one kind of inconel wire mesh.The Incoloy 800 alloy has Cr 15-25%, Ni30-45%, and little of aluminum and titanium.The alloy has a high chromium content and a sufficient nickel content, so it has high high temper

Incoloy 825 alloy wire mesh( also called incoloy N08825 wire mesh,standard of America) is one kind of inconel wire mesh. Incoloy 825 wire mesh is a Ni – Fe– Cr alloy with additions of molybdenum and copper.The Incoloy 800 alloy has Cr 19.5-23.5%, Ni38-46%, Mo2.5-3.5%,Cu1.5-3%.The mesh general is use